SupsPOWER
madeinchina
  • Chinese Version
  • SUN-D Series Off-Grid Inverter/Charger All-in-One System

    Sun-D Series is a full digitized controlled. powerful all-in-one Charger/INV System. It has dual AC Prioritized Mode and INV Prioritized Mode. Also equipped with adjustable large charging current charger, SIN Series can shorten the charging time to extend battery lifetime.

    • Features

    • Specifications(0.1KVA-0.6KVA)

    • Specifications(0.8KVA-1.2KVA)

    High Performance Index

    High overload ability ;

    Low battery voltage trip selectable,extracting max power from various batteries with different protections ;

    Low quiescent current,selectable sensing cycle to reduce power consumption;


    Charging Section

    3-step intelligent battery charging;

    8 preset battery type selector plus de-sulphation for totally batteries;

    Powerful charge rate up to 70Amp,selectable charging current;

    PFC(Power Factor Correction)for charger, less power consumption than conventional units.


    Transfer Section

    Ability to switch the unit on/off manually ;

    Ability to select/deselect power saver mode ;

    17 alarms/warmings,informative for easier operation and troubleshooting ;

    LCD status display available;

    RS232 communication port optional


    Compatible applications/loads

    Sun-D Series is Suitable in the following Environments: SOHO, Office, NT Stations, IT Applications POS, Manufacturing, and etc.




    Capacity Sun 10-12/24D
      1000W
    Sun 20-12/24/48D
      2000W
    Sun 30-12/24/48D
      3000W
    Sun 40-24/48D
      4000W
    Sun 50-24/48D
      5000W
    Sun 60-24/48D
      6000W
    Host Machine Specification
    Design   Structure BAT/AC Mode  Selectable
    External   Structure Output Isolated Transformer Design ,Wall Mounted
    Overall Efficiency  Line Mode: >>95%
    BAT Mode:>85%
    Power Saver :Available when the load is less than 50watts
    Noise( >In 2 Meters >) < 60dB
    Working Temp. 0-40
    Storage Temp. -25 ~ 60℃( >Without  BATs >)
    Humidity < 95% Non-condensing
    Safety   Standard IEC62040
    Protection Overload, Short-Circuit, Over Temp., Utility Power Voltage High/low, BAT Voltage High/low
    Generator   Capability Yes
    AC Input Specification
    Phase & waveform Single phase & Sinewave
    Input Voltage 100/120/220/230/240Vac
    Input Frequency 50Hz/60Hz ( >Auto-Tracking  >)
    Input Voltage range 194-243Vac/164-243Vac( Wide Mode) 
    Line Low   Transfer 85Vac ±84%/184Vac ( >154 Wide Mode ±4%) 
    Line Low   Recovery 95Vac±4%/194Vac(164 Wide Mode±4%) 
    Line high transfer 135Vac ±4%/253Vac ±4% 
    Line high Recovery  127Vac ±4%/243Vac ±4% 
    Line Low   Transfer ≤47Hz = 50Hz、≤57Hz = 60Hz 
    Line high Transfer AC ≥55Hz = 50Hz、≥65Hz = 60Hz 
    Output Specification
    Phase & waveform  Single phase & Sinewave (Sync to input on AC Mode) 
    Output Voltage 100Vac/120Vac/220Vac/230Vac/240Vac Single Phase (Sync to input on AC Mode)
    Voltage   regulation ±10%rms ( Sync to input on AC Mode
    Output   Frequency 50/60Hz (Auto-Tracking) 
    Frequency   Tracking Range 46-54Hz 
    Output   Waveform Pure Sinewave
    Crest Ratio 3∶1 
    Short Circuit Protection  Shutdown after 10 minutes
    Power  Factor  0.9-1.0
    DC Input Parameters
    Battery   Voltage 12Vdc/24V dc 、 >12Vdc/24Vdc/48V dc >、 >24Vdc/48V dc
    Minimum Start Voltage 10Vdc/12Vdc、 >20Vdc /24Vdc >、 >40Vdc/48V dc
    Low Voltage Alarm 10.5Vdc/12Vdc 、 >21Vdc/24Vdc >、 >42Vdc/48V dc
    Low Battery Transfer 10Vdc/12Vdc 、 >   20Vdc/24Vdc >、 >40Vdc/48V dc
    High Voltage Alarm 16V dc/12Vdc 、 > 32Vdc/24Vdc >、 > 64Vdc/48V dc
    Max Charging Current  20-75A
    Overcharge   Voltage 15.7Vdc/12Vdc 、 >31.4Vdc/24Vdc >、 >62.8Vdc/48Vdc 
    Indicators
    7-LED Display From the right to the left,LED 1 line Mode (green Lighting).LED2 inverter mode (green lighting).LED3
      charging mode(yellow lighting).LED4 Fully charged (green lighting).LED5 over heat shutdown (red
      lighting ).LED6 overloaded Shutdown (red lighting).LED7 saving mode (green lighting)
     
    3-LED Display Charging Mode(green lighting).inverter mode (green lighting). Alarm(red lighting)
    Switch   Selector  Saving mode is on/off when push the switch forwards/backwards,keeping horizontal is turning inverter off
    Audible   Alarm   Sounding when the heatsink's Temp. is over 105 ℃ and shutdown after 30 seconds
    Communication Parameters
    Communication   Port RJ11/RS232(Optional) 
    Physical Parameters
    Size mm( >DxWxH >) 218×179×442 218×179×598
    Net Weight Kg  14 19 23 35 44 44


    Note: Specifications are subject to   change without further notice.



    Capacity Sun 80-48D
    8KW
    Sun 100-48D
    10KW
    Sun 120-48D
    12KW
    Host   Machine Specification
    Design   Structure BAT/AC Mode  Selectable
    External   Structure Output Isolated   Transformer Design,Wall   Mounted
    Overall Efficiency  Line Mode:>95%
    BAT   Mode:>85%
    Power   Saver :Available when the load is less than 75watts
    Noise(In 2 Meters) <   60dB
    Working   Temp. 0-40
    Storage   Temp. ——25   ~ 60℃(Without  BATs)
    Humidity <   95% Non-condensing
    Safety   Standard IEC62040
    Protection Overload,   Short-Circuit, Over Temp., Utility Power Voltage High/low, BAT Voltage   High/low
    Generator   Capability Yes
    AC   Input  Specification
    Phase   & waveform Single   phase & Sinewave
    Input   Voltage   100/120/220/230/240Vac
    Input  Frequency 50Hz/60Hz   (Auto-Tracking  )
    Input   Voltage range 154-273Vac
    Line Low   Transfer 154Vac
    Line Low   Recovery 164 Vac
    Line   high transfer  273Vac
    Line   high Recovery   263Vac
    Line Low   Transfer 40Hz 
    Line   high Transfer AC  80Hz 
    Output   Specification
    Phase   & waveform  Single phase & Sinewave (Sync to input   on AC Mode) 
    Output   Voltage 220Vac/230Vac/240Vac    Single    Phase (Sync to input on   AC Mode  )
    Voltage   regulation ±10%rms   ( Sync to input on AC Mode 
    Output   Frequency 50/60Hz   (Auto-Tracking) 
    Frequency   Tracking Range 46-54Hz 
    Output   Waveform Pure   Sinewave
    Crest   Ratio 3∶1 
    Short   Circuit Protection  Shutdown after 10 minutes
    Power  Factor  0.9-1.0
    DC   Input  Parameters
    Battery   Voltage 48V   dc
    Minimum   Start Voltage 40Vdc
    Low   Voltage Alarm 44Vdc
    Low   Battery Transfer 40Vdc
    High   Voltage Alarm 64Vdc
    Max   Charging Current  75A
    Overcharge   Voltage 62.8Vdc
    Indicators
    4-LED   Display Charge ,Line ,   Inverter , Fault
    LCD  Display Input Voltage,Output   Voltage,Frequency , Battery Saving mode is on/off when push the switch   forwards/backwards,keeping horizontal is turning inverter off
    Switch   Selector  Saving mode is on/off   when push the switch forwards/backwards,keeping horizontal is turning   inverter off
    Audible   Alarm   Sounding when the   heatsink's Temp. is over 105 ℃ and   shutdown after 30 seconds
    Communication   Parameters
    Communication   Port RJ11/RS232(Optional) 
    Physical   Parameters
    Size mm(DxWxH) 549x450x201 584x450x201
    Net   Weight Kg  56 64 68


    Note: Specifications are subject to   change without further notice.

    沪ICP备120004604号                                     Copyright © 2003-2013 Shanghai SHIDA Information & Technology Co.,Ltd. All Rights Reserved